ONE-WAY VIDEO, FRAMELOCK FIBER OPTIC TRANSMITTER - MULTIMODE The one-way video, Framelock ext. sync transmitter propagate the FM modulated signals (1,300nm) through multimode fiber optic cables, for up to 8km (26,246ft) distances, and can be used for any application requiring one-way signal transmission.

Specifications Propagation : Two-way multiplexed via single or dual fibers Fiber Cable : Multimode 62.5/125 Video Transmission Spectrum : 1350nm (including & ) Ext. Sync & Control Transmission Spectrum : 850nm (via two-way/single fiber), 1350nm (via two-way/dual fiber) Video & Bandwidth : FM, 5Hz ~ 10MHz Video Signal : 1Vp-p Video Input/Output Impedance : 75Ω Signal to Noise Ratio : > 54dB @maximum optical attenuation Maximum Optical Attenuation : 13dB Differential Gain : <3% Differential Phase : < 3° Ext. Sync, Control & RS422 Bandwidth : FM, 10Hz ~ 2MHz Ext. Sync & Control Signal to Noise Ratio : > 50dB @maximum optical attenuation Transmission Distance : up to 5km* (single fiber), up to 8km (dual fibers) Fiber Connector : ST Video Connector : BNC RS422 Connector : 3.5mm stereo jack or terminals Power Connectors : Terminals AC Power In : 24V, 100/120V, 230/240V AC 50/60Hz Power Consumption : Receiver approx. 8W, Transmitter approx. 12W Power Output to Camera : DC 15V/300mA, AC24V/0.4A Operating Temperature : - 10°C ~ + 50°C Measurement : 175 (L) x 100 (W) x 64 (H)mm Weights : Receiver approx. 860g, Transmitter approx. 1kg. *The maximum distance for an ID control signal viacoax is 300m for I-D-CODE cameras without time delay . Specifications and dimensions subject to change without notice.